Sale!

Monorim Hinge and pole

£65.00 £59.99

The Monorim Hinge and pole is the essential upgrade for xiaomi m365/pro/s1/s1pro copys such as the pure scooters.

100 in stock

Category:

Description

The Monorim Hinge and pole is the essential upgrade for xiaomi m365/pro/s1/s1pro copys such as the pure scooters.

 

The great advantage of this is the hinge is actually welded to the pole. On the original that comes with the xioami models it is held in with 2 split pins. As the xiaomi’s don’t have suspension so these split pins loosen over time with the vibrations.

 

The next big improvement is monorim have placed the locking handle on the front side of the pole, this removes the need for the fiddly adjustable bolt that runs through the hinge, on the original this is prone to snapping along with the clamp.

On the Monorim Hinge and pole the hinge handle has a small sprung safety clip that cilps into the pole, another massive improvement.

 

 

Set up

 

The set up is relatively simple. Just remove the handle bar and unplug the data cable and disconnect the brake cable. Take of the red rubber fillers from the pole and place to one side. Loosen the bolts at the bottom of the hinge and undo the bolt in the center of the hinge.

When attaching the Monorim Hinge and pole make sure to put pressure down on the wheel when tightening up the bolt in the center, this will reduce wobble. thread the data and brake cable back through the pole and then replace the rubber fillers. Reconnect the data cable and brakes then re attach the handlebar. Make sure before you use the scooter that you test the brakes and that everything is securely attached.

 

If at all in any doubts, scan the QR code on the side of the box and this will take you to monorim who have an installation guide

 

As ever our shipping is next day using royal mail 24.

Additional information

Weight 1000 g