Kukirin G2 Display

Description

Kukirin G2 Display

This Display is for the G2 pro, G2 Max and G2 master.

On this listing we have 2 options available so please check before ordering.
Both displays are identical however one of the plugs is different due to changes that have been made to the lay out of controls on the handle bar over the production life of the scooters.

One of the displays has: 2x 2pin, 2x 5 pin and 1x 4pin connectors
The other display has :2x 2pin, 2x 5pin and 1x 6 pin connectors

Both Kukirin G2 displays essentially are the same but will not work if buying the incorrect one as all the connectors need to match.

The LCD shows indicators, odometer speed in KM or MPH, battery voltage, battery bar, Dual or single motor (for kukirin G2 master only)

Kukirin G2 display – whats in the box

1x kukirn G2 display

1x mounting bracket (pair) already fitted so you can quickly and easily replace the entire unit.

 

Kukirin G2 display – Display Settings and error codes

Kukirin G2 display settings

P01 : KM/MPH

P02: Voltage – this should be set at the level your scooter runs to (g2 pro and G2 max is 48v, G2 master is 52v) this setting does not affect speed just the battery bar being accurate or not.

P03: Wheel diameter in Inches

P04: Speed measurement (30)

P05: Cruise control (0 off/ 1 on)

P06 : Kick start (0 off/ 1 on). On means you have to kick the scooter off for it to run, 0 means it will run from stationary without needing to kick off

P08: Auto shut down timer in minutes of inactive use (1-5)

PA : Torque – the power the motor puts down when accelerating

PB : E-brake force (0 none, 5 full) we recommend 3 or 4 but its really personal choice.

 

Error codes and settings are the same across Kukirin G2 the range

E-001 : Rear motor malfunction – Motor sensors or communication problems, cable may be damaged or motor damaged.

E-002 : throttle malfunction – Hall sensor or cable damaged, replace.

E-003 : Controller malfunction – Check cabling – may need a new controller.

E-005 : Battery under voltage – Battery may need charging or replacing if error persists

E-006 : Instrument malfunction – Check all cabling. Diagnostics may have to be carried out to identify actual fault.

E-007 : instrument malfunction – Check all cabling. Diagnostics may have to be carried out to identity actual fault.

E-009 : Over-temperature protection – Controller is reporting high temperature (your probably overloading the scooter with to much weight or overly aggressive riding)

E-011 : Front motor malfunction – (G2 master only) Motor sensors or communication problems, cable may be damaged or motor damaged.

E-013 & E-017 : Controller malfunction – Diagnostics required, controller has developed faults.

The scooter.shop Ltd has a workshop and specialises in Kukirin products, so if you do face problems we can carry out repair work if necessary. We cannot solve problems over the phone unfortunately unless very obvious to yourself. If you do need work, just drop us a call or come down and book your scooter in for servicing.

 

Kukirin G2 display shipping

Free shipping is with Royal mail 48, this is a 2-3 working day service.

If you need your order fast then please opt for Royal mail 24 which is a 95% next day service.